Computer Desk Hutch Plan Ideas

Dec 11th

Computer desk hutch – Adding a cage to an existing table is an easy way to increase the usefulness of your desk. You can give yourself more storage space to remove all those parts and pieces that can clutter your desk and make your room look messy. With basic carpentry skills and some simple tools, you should be able to make a cage with a few shelves in a few hours. If you are a competent woodworker, you can also add doors and drawers to the cabin and vary the size of the openings. Measure the width and depth of your desk. A Hutch will usually be as wide as the reception, and a third of the depth of the table. The height depends on the number of shelves you want to have.

Computer Desk With Hutch Ikea

When choosing wood for computer desk hutch, pine thickness of 1/2 inch in one foot by eight feet together should work well. These can be dyed or painted to match or coordinate with the reception and decoration of your room. Cut two pieces of wood at the height you want your cabin. A basic cabin could be two feet high, with two horizontal shelves placed at heights of your choice. These pieces will be the two uprights on each side of the cabin. Measure and mark the position of the shelves inside your two uprights based on how high you want your shelves. Drill two small pilot holes per shelf in each stud. Drill holes approximately two inches from the front and rear edges of the studs.

12 Photos Gallery of: Computer Desk Hutch Plan Ideas

Image of: Computer Desk And Hutch Combo
Image of: Computer Desk With Hutch Ikea
Image of: Cheap Computer Desk With Hutch
Image of: Wood Computer Desk With Hutch
Image of: Small Desks With Hutch
Image of: Sauder Computer Desk With Hutch
Image of: Office Desk With Hutch
Image of: Home Office Desk With Hutch
Image of: Desk With Hutch Walmart
Image of: Desk Hutch Organizer
Image of: Corner Desk With Hutch
Image of: Corner Computer Desk With Hutch
READ  Classical Idea of Decoration Antique Kitchen Hutch

Make computer desk hutch, insert the platform angle galvanized supports into the uprights. One zinc shelf stand has a load capacity of 25 pounds, and these are enough to hold the shelves firmly in place. Cut the 1/4 inch plywood to the size of the cabin. This is the height of the cabin for the width of the cabin. The plywood forms the rectangular board of the cabin. Staple the board to the back of the two studs. Place the uprights and table top and slide the shelves into place. Make a home improvement sales representative to help choose the right finish. Paint several layers of your finish on the dresser.